Wearcon > Wear and Impact Grid

Description
WEARBACK “HI” is a 100% solids modified epoxy resin system formulated for the use as a superior backing compound for crusher liners. When cured it provides a high compressive strength support for wear liners.
WEARBACK “HI” is supplied in safe and convenient kit form for easy mixing and application

Preparation
Seal all crevices with putty or other suitable material to prevent backing material from leaking out.

Mixing
The resin and hardener must be thoroughly mixed together before application by using a slow speed drill. Mixing continues until uniform colour is obtained (3-5 minutes) With ambient temperature at 25°C a full kit must be poured into place within 15 – 20 minutes.

Specifications

Compressive strength	160 Mpa
Flexural strength	66 – 70 Mpa
Modulus of elasticity	10 – 15 Mpa
Tensile strength	38 – 45 Mpa
Gel time	20 Min at 25°C
Curing time	8 Hours at 25°C
Working Time	10 Min at 25°C
Heat distortion	95°C

Caution
When using epoxy resin systems, care should be taken to avoid contact with skin, eyes and clothing.
Use gloves and eye protection when handling. Do not inhale vapour. Ensure there is sufficient airflow through the work area.

KIT SIZE: 10kg and 20kg

WEARCON (PTY) LTD - Wear Linings
Abrasion Protection, Wear Resistant Linings, Epoxy Resin, Acid-Proof Epoxy Resin Systems, Powder Epoxy Resin, Steel Putty, Metal Repair Putty, Epoxy Putty, Epoxy Grout, Mixing Epoxy Grout, Pipe Lining, Crusher Backing Material