 |
 |
| Wear Protection Products: |
Contact Us: Product Sales Applications Product enquiries: Wearcon (PTY) Ltd |
Description
WEARCOAT “FP” is a flame proof epoxy ceramic resin primarily used for underground applications.
Application
WEARCOAT “FP” is applied to the prepared surface with a trowel or by hand at the required thickness, from 3mm upwards, depending upon the application.
Surface preparation
A properly prepared surface is important to the end result and lasting durability of WEARCOAT “FP”. Steel surfaces should be dry grit blasted to SA 2.5 with blast profile between 50-70 microns to leave the surface free of oil and grease contamination. In cold conditions it is recommended to warm the substrate to 30-35°C.
Specifications
| Compressive strength | 84 Mpa |
| Tensile strength | 20.9 Mpa |
| Working time | 30 Min at 25°C |
| Gel time | 45 Min at 25°C |
| Curing time | 4 – 6 Hrs at 25°C |
| Heat deflection | 250 – 300°C |
Theoretical coverage
1 m² at 4 mm thickness per 10 kg kit
Typical applications
Underground applications.
Kit Size: 10 Kg
 |
WEARCON (PTY) LTD - Wear Linings |
 |