 |
 |
| Wear Protection Products: |
Contact Us: Product Sales Applications Product enquiries: Wearcon (PTY) Ltd |
Description
WEARCOAT “PC” is a 100% solids modified epoxy resin system containing sapphire hard alumina ceramic
to withstand severe cavitations, tough abrasion and moderate impact.
APPLICATION
WEARCOAT “PC” is poured inside the prepared pipe. The pipe lining Machine spins the pipe at various revolutions to ensure an even thickness of the lining.
SURFACE PREPARATION
A properly prepared surface is important to the end result and lasting durability of WEARCOAT “PC”. Steel surfaces should be dry grit blasted to SA 2.5 with blast profile between 50-70 microns to leave the surface free of oil and grease contamination. The application of the lining is then done by our trained technical staff at our factory or on site.
SPECIFICATIONS
| Compressive strength | 115,5 Mpa |
| Flexural Strength | 62 Mpa |
| Impact strength | 25 Jm |
| Specific gravity | Specific gravity1.97 |
ACID RESISTANCE AT ROOM TEMP
| Caustic soda | 50% |
| Sulphuric Acid | 60% |
| Phosphoric Acid | 10% |
| Sodium hydroxide | 50% |
| Hydrochloric Acid | 20% |
Pipe Sizes
100mm outside diameter up to 610mm outside diameter.
Pipe Lengths
500mm up to 9 meters
Lining Thickness
5mm to 15mm
- LININGS DONE AT OUR FACTORY OR ON SITE
- LINING OF NEW AND EXISTING PIPELINES FOR LONGER LIFE EXPECTANCY
 |
WEARCON (PTY) LTD - Wear Linings |
 |