Wear Protection Products:

Contact Us:

Product Sales
Tel: +27 11 814 7225
Fax: +27 11 814 7214

Applications
Tel: +27 11 814 2983
Fax: +27 11 814 2984

Product enquiries:
eugene@wearcon.co.za

Wearcon (PTY) Ltd
PO BOX 483, Nigel
1490, South Africa.

 

Wearcoat "TP" Wear Protection - Trowlable Wearing Compound
Wearcoat
WEARCOAT ‘TP’ is a 100% solids modified epoxy resin system containing sapphire hard alumina ceramic beads to withstand severe cavitations, tough abrasion and moderate impact.

Click for Product TDS

 
Wearcoat "FP" Flame Proof Ceramic Lining – Underground applications
Wearcoat WEARCOAT ‘FP’ is a 100% solids modified epoxy resin system which is flame proof for any underground applications.

Click for Product TDS

 
Wearcoat "AD" Abrasion Protection – Wearing Compound
Wearcoat WEARCOAT ‘AD’ is a 100% solids modified epoxy resin system containing sapphire hard alumina ceramic beads to withstand severe cavitations, tough abrasion and corrosion.

Click for Product TDS

 
Wearcoat "TW" Wear Protection – Conveyor Pulleys
Wearcoat WEARCOAT ‘TW’ is a 100% solids modified epoxy resin system containing sapphire hard alumina ceramic beads to withstand severe cavitations, tough abrasion and moderate impact.

Click for Product TDS

 
Wearcoat "FC" Fast Cure Wearing Compound ( 40 min )
Wearcoat WEARCOAT ‘FC’ is a 100% solids modified epoxy resin system that cures 40 min from application.

Click for Product TDS

 
Wearcon Steel Putty – Machine able Metal repair putty
Wearcon Steel Putty - Machine able Metal repair putty Wearcon Steel Putty is a steel reinforced epoxy putty, used for permanent repairs on steel, glass , ceramics and more. Bonds like epoxy, hardens like steel.

Click for Product TDS

 
Wearback ‘Std’ – Crusher Backing Material
Wearback 'Std' - Crusher Backing Material Wearback ‘Std’ is a 100% solid modified epoxy resin system backing material for easy use in all types of crushers and griding mills. Wearback is non-flammable and requires no special mixing or melting equipment.

Click for Product TDS

 
Wearback "HI" - Crusher Backing Material
Wearback Wearback ‘HI’ is a 100% solids modified epoxy resin system formulated for the use as a superior backing compound for crusher liners. When cured it provides a high compressive strength support for wear liners.

Click for Product TDS

 
Wear and Impact Grid
Wear and Impact Grid

The Impact grid has very high impact and wear resistant properties. Tests have proven the impact grid performs 7 - 10 times longer than similar applications. Easy to install with minimum down time.

Click for Product TDS

 
Wearpox DF
Wearpox DF Wearpox DF is a 100% solids modified epoxy grout formulated for fast and easy pouring up to 450 mm. Due to the fluid consistency of the product, it flows well under rails, structural columns etc. Withstands high torque loading and vibration. Bonds to steel, concrete and can withstand temperatures up to 75°C.

Click for Product TDS

 
Wearpox FC
Wearpox FC Wearpox FC is a 100% solids epoxy grouting system formulated for fast and easy pouring from 5mm 25mm.

Click for Product TDS



WEARCON (PTY) LTD - Wear Linings
Abrasion Protection, Wear Resistant Linings, Epoxy Resin, Acid-Proof Epoxy Resin Systems, Powder Epoxy Resin, Steel Putty, Metal Repair Putty, Epoxy Putty, Epoxy Grout, Mixing Epoxy Grout, Pipe Lining, Crusher Backing Material