 |
 |
| Wear Protection Products: |
Contact Us: Product Sales Applications Product enquiries: Wearcon (PTY) Ltd |
Description
WEARCOAT TW is a 100% solids modified epoxy resin system, containing sapphire hard alumina ceramic chips and formulated to withstand severe cavitation.
Application
WEARCOAT TW is applied to the prepared surface with a trowel or by hand at the required thickness, from 10mm upwards, depending upon the application.
SURFACE PREPARATION
A properly prepared surface is important to the end result and lasting durability of WEARCOAT TW. Steel surfaces should be dry grit blasted to SA 2.5 with blast profile between 50-70 microns to leave the surface free of oil and grease contamination. In cold conditions it is recommended to warm the substrate to 25°C.
Specifications
| Physical Properties | |
| Impact Resistance | 25.3 J |
| Density | 2.33 g/cm³ |
| Heat Deflection | 150°C to 180°C |
| Wear Resistance | <0.1 mm/min. |
Curing |
|
| Gel time | 45 min at 25°C |
| Working time | 30 min at 25°C |
| Curing time | 4 Hrs at 25°C |
Acid Resistance at Room Temp.
| Chemical | %Weight Loss | Duration |
| Sulphuric Acid | 50% <0.1% | 7 Day’s |
| Phosphoric Acid | 50% <0.1% | 7 Day’s |
| Hydrochloric Acid | 20% <0.1% | 7 Day’s |
| Caustic soda | 30% <0.1% | 7 Day’s |
Theoretical Coverage
12kg Kit, 1m² at 5.8mm thick not compacted and 4.1mm thick - compacted
Typical Application
Lining of pipe bends, pump casings, chutes, hoppers, launders, valves, underflow pans etc.
KIT SIZE: 12Kg
 |
WEARCON (PTY) LTD - Wear Linings |
 |