Wear Protection Products:

Contact Us:

Product Sales
Tel: +27 11 814 7225
Fax: +27 11 814 7214

Applications
Tel: +27 11 814 2983
Fax: +27 11 814 2984

Product enquiries:
eugene@wearcon.co.za

andre@wearcon.co.za

Wearcon (PTY) Ltd
PO BOX 483, Nigel
1490, South Africa.




Legal Issues

 

Wear and Impact Grid CERAMIC IMPACT PROTECTION PROCEDURE

WEARCON IMPACT GRID is a ceramic impact protection procedure comprising of Mentis Grating mild steel Recta Grid filled with cylindrical ceramic tiles and supported with WEARCOAT TP a 100% solids modified epoxy resin system containing sapphire hard alumina ceramic to withstand severe cavitations, tough abrasion and high impact.

Applications:
The WEARCOAT TP ceramic lining compound is evenly distributed over the required area of the Mentis Grating. The cylindrical tiles are forced into position, filling every square of the grid. The ceramic compound is evenly spread over the entire area of the prepared grid, smoothed and finished off to ensure an even thickness of the lining throughout.

SURFACE PREPARATION
A properly prepared surface is important to the end result and lasting durability of WEARCOAT TP. Steel surfaces should be dry grit blasted to SA 2.5 with blast profile between 50-70 microns to leave the surface free of oil and grease contamination. The IMPACT GRID application is done by our trained technical staff at our factory or on site.

Specifications

Mentis Grating “Recta Grid” 30mm Mild Steel
Ceramic cylindrical tile 30mm x 30mm
   
WEARCOAT TP Ceramic Lining
Compressive strength 115,5 Mpa
Flexural strength 62 Mpa
Impact strength 25 Jm
Specific gravity 1.97
   
ACID RESISTANCE AT ROOM TEMP
WEARCOAT TP Ceramic Lining
Caustic Soda 50%
Sulphuric Acid 60%
Phosphoric Acid 10%
Sodium Hydroxide 50%
Hydrochloric Acid 20%

WARNING
When using epoxy resin systems, care should be taken to avoid contact with skin, eyes and clothing. Use gloves and eye protection when handling. Do not inhale vapour. Ensure there is sufficient ventilation throughout the work area.


WEARCON (PTY) LTD - Wear Linings
Abrasion Protection, Wear Resistant Linings, Epoxy Resin, Acid-Proof Epoxy Resin Systems, Steel Putty, Metal Repair Putty, Epoxy Grout, Pipe Linings, Crusher Backing Material