Wear Protection Products:

Contact Us:

Product Sales
Tel: +27 11 814 7225
Fax: +27 11 814 7214

Applications
Tel: +27 11 814 2983
Fax: +27 11 814 2984

Product enquiries:
eugene@wearcon.co.za

Wearcon (PTY) Ltd
PO BOX 483, Nigel
1490, South Africa.

 

Wearpox DF

MACHINE GROUT

Description
WEARPOX DF is a 100% solids modified epoxy grout formulated for fast and easy pouring up to 450 mm. Due to the fluid consistency of the product, it flows well under rails, structural columns etc. Withstands high torque loading and vibration. Bonds to steel, concrete and can withstand temperature up to 75°C

Preparation
For best results provide a pouring area of 40mm or more between the foundation and column or rail

Mixing
Mix with slow speed drill until uniform colour is obtained. With the ambient temperature at 25°C a full kit must be poured into place as soon as possible after mixing.

Specifications

Compressive strength 115 Mpa
Impact strength 15 Mpa
Working time 25 Min at 25°C
Gel time 20 - 25Min at 25°C
Time to reach operating strength 24 Hrs at 25°C

Typical application
Machine basis, structural columns, punch presses, bridge seals, rails, etc

CAUTION
When using epoxy resin systems, care should betaken to avoid contact with skin, eyes and clothing.
Use gloves and eye protection when handling.Do not inhale vapour. Ensure there is sufficient Ventilation Throughout the work area

Kit Size: 10kg and 20kg


WEARCON (PTY) LTD - Wear Linings
Abrasion Protection, Wear Resistant Linings, Epoxy Resin, Acid-Proof Epoxy Resin Systems, Powder Epoxy Resin, Steel Putty, Metal Repair Putty, Epoxy Putty, Epoxy Grout, Mixing Epoxy Grout, Pipe Lining, Crusher Backing Material