Wear Protection Products:

Contact Us:

Product Sales
Tel: +27 11 814 7225
Fax: +27 11 814 7214

Applications
Tel: +27 11 814 2983
Fax: +27 11 814 2984

Product enquiries:
eugene@wearcon.co.za

Wearcon (PTY) Ltd
PO BOX 483, Nigel
1490, South Africa.

 

Wearpox FC

Description
WEARPOX FC is a 100% solids epoxy grouting system formulated for fast and easy pouring from 5 mm to 25 mm

Preparation
Areas to be grouted must be free of rust, grease and other loose material.

Mixing
The resin and the hardener must be thoroughly mixed together before application by using a slow speed drill.
Mixing continues until a uniform colour is obtained. With ambient temperature at 25°C a full kit must be poured into place directly after mixing.

Specifications

Compressive strength

100 Mpa

Tensile Strength 19 Mpa
Maximum Operating Temperature

60°C

Gel time 20 – 40 Min
Time to reach operating strength

12 – 24 Hrs at 25°C

Typical application
Metal anchor bolts to concrete, shim pads air pads, Crushers, grind mills, engines presses etc…

Caution
When using epoxy resin systems, care should be taken to avoid contact with skin, eyes and clothing. Use gloves and eye protection when handling. Do not inhale vapour ensure there is sufficient ventilation throughout the work area.

KIT SIZE: 10kg


WEARCON (PTY) LTD - Wear Linings
Abrasion Protection, Wear Resistant Linings, Epoxy Resin, Acid-Proof Epoxy Resin Systems, Powder Epoxy Resin, Steel Putty, Metal Repair Putty, Epoxy Putty, Epoxy Grout, Mixing Epoxy Grout, Pipe Lining, Crusher Backing Material